PR655 / PR655C UPDATE HISTORY DETAIL

Version 4.20 (September 2013)

Fixed the situation where the embroidery pattern was not rotated 180 degrees if the embroidery frame was changed from a cap frame to a different type of frame or from a different type of frame to a cap frame when the machine finished sewing the pattern using the Link function.
The starting/ ending position settings are changed to the center of pattern when using Clamp frame SR or Clamp frame SL.

Version 4.21 (December 2013)

Fixed the situation where the LED pointer was not turned on when moving the needle back using the Forward/Backward stitch Key after the error message for checking the upper or bobbin thread was displayed.
Fixed the situation where the machine may not work correctly after the error message was displayed by selecting the appliqué setting.
Improved so that the embroidery pattern moves by 0.1 mm when the arrow keys are pressed on the pattern editing screen.
When you keep pressing the arrow keys, the pattern moves by 5 mm.

Version 4.22 (January 2015)

Fixed minor issues.

Please note that this “Service Related” machine update (version 4.22 for PR655, 650e and 650) needs only to be installed at a time of product service at a Brother authorized service center.
Please be sure to note this with your service technician when your machine is serviced.

Version 4.24 (January 2016)

Improved functionality of the following feature

Running Stitch uniformity with frame pattern enlargement.

Added (ALL CLEAR) key to delete all the specified colors from the custom thread palette.

Version 4.25 (May 2016)

Improvement for measures against electrostatic noise.

Version 4.31 (February 2017)

The following optional embroidery frame can be used on the machine.

Sleeve frame (PRHSL200) - 200 mm (H) × 70 mm (W) (7-7/8 inches (H) × 2-3/4 inches (W))

The display of the embroidery area on the pattern display screen will be indicated in concert with the embroidery frame holder and the embroidery frame installed in the machine.
The guide settings on page 1 in the settings screen will be also displayed in concert with them.

Version 4.40 (June 2017)

The following optional embroidery frames can be used on the machine.

Clamp frame M : 100mm (H) × 100 mm (W) (4 inches (H) × 4 inches (W))
Compact frame set

70: 41 mm (H) × 70 mm (W) (1-5/8 inches (H) × 2-3/4 inches (W))
50: 50 mm (H) × 50 mm (W) (2 inches (H) × 2 inches (W))
44: 38 mm (H) × 44 mm (W) (1-1/2 inches (H) × 1-3/4 inches (W))
Portrait orientation: 33 mm (H) × 75 mm (W) (1-5/16 inches (H) × 2-15/16 inches (W))

"D/E ADJUST" settings will be added on page 1 in the settings screen after updating the machine's software.

To use the above optional embroidery frames, perform the following operation before using the frames.

Make sure that the machine is updated to version 4.40 or later.
Touch the Settings key to display the settings screen.
Touch "D/E ADJUST" settings key on page 1.
Make operations in accordance with the directions on the screen.
Sensor adjustment for frame & frame holder will be automatically carried out and completed if they are correctly attached to your machine.

DE ADJUST

Instructions (PDF, 1.31 MB)

Note:
This operation is needed only for the initial time when above frame is being used with embroidery frame holder D or E.

Version 4.41 (August 2017)

Adjusted the machine reading the available embroidery area.

Version 4.44 (September 2020)

Satin stitch quality has been improved.

Back